Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[jh11] i70 wind not displaying
08-30-19, 12:20 PM (This post was last modified: 09-03-19 09:39 AM by John - Raymarine - Moderator.)
Post: #1
[jh11] i70 wind not displaying
I have an i70 display with wind, speed, depth.

My wind instruments display Wind angles but not wind speeds. Worked this morning, but now I can see the paddles turning but the display shows zeros. Tried a factory reset to no avail. Thoughts?

Michael
Find all posts by this user
Quote this message in a reply
09-03-19, 09:57 AM
Post: #2
RE: [jh11] i70 wind not displaying
Michael,

Thank you for reaching out to us on the forum.

Take a look at your Diagnostics and identify if the ITC 5 is being recognized.

On the ITC 5

Menu>Set-up>Diagnostics>About System>Continue>Find ITC-5 on the list

If the ITC 5 is displaying then you will want to locate that device and identify what the LED's are doing. You can find the indications here ITC 5 Manual

You can further reference troubleshooting on your anemometer. Please click here to view a FAQ addressing this subject.

Best Regards
John
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us