Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[JH] [JH11] Axiom compatibility
09-03-19, 10:35 PM (This post was last modified: 09-04-19 09:55 AM by John - Raymarine - Moderator.)
Post: #1
[JH11] Axiom compatibility
I currently have an E7D and will be replacing with an axiom pro 9. My current peripherals are an SPX 5 pilot, HD radar (2012-3), AIS 650. Are these peripherals all compatible with the Axiom? Can the E7D act as a slave? Tnx
Find all posts by this user
Quote this message in a reply
09-04-19, 09:58 AM
Post: #2
RE: [JH11] Axiom compatibility
Mark,

Thank you for your post. Your current peripherals that are listed are all compatible with the Axiom Pro 5. The HD radar will connect through the Raynet. The SPX5 and the AIS 650 will connect through Seatalk NG/Devicenet.

The e7D is not compatible to be networked with the Axiom Pro on the same Raynet network so it would not be able to act as a slave.

Best Regards
John
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)