Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Upgrading ST6001
09-05-19, 02:38 PM (This post was last modified: 09-11-19 12:00 AM by Tom - Raymarine - Moderator.)
Post: #1
Upgrading ST6001
Hi - I'd like to upgrade this without changing the autopilot computer etc to the Raymarine P70s Autopilot Controller, is that a simple replace or more complex?
Find all posts by this user
Quote this message in a reply
09-11-19, 12:02 AM
Post: #2
RE: Upgrading ST6001
Hello nickvh,

Yes, you can connect a p70, p70R, p70S or p70RS into a Seatalk1 pilot system via an A06073 3pin-6pin adaptor cable and a D244 Seatalk 3-way junction block. This won't change the pilot's operation or performance (the display is just that, all of the intelligence of the pilot is in the course computer) but will update the look of the helm of course.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
09-12-19, 04:21 PM
Post: #3
RE: Upgrading ST6001
(09-11-19 12:02 AM)Tom - Raymarine - Moderator Wrote:  Hello nickvh,

Yes, you can connect a p70, p70R, p70S or p70RS into a Seatalk1 pilot system via an A06073 3pin-6pin adaptor cable and a D244 Seatalk 3-way junction block. This won't change the pilot's operation or performance (the display is just that, all of the intelligence of the pilot is in the course computer) but will update the look of the helm of course.

Regards,
Tom

Thanks Tom - all ordered!
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us