Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] MARINE CHARTS COMPATIBILITY
09-12-19, 03:22 AM (This post was last modified: 09-12-19 09:27 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] MARINE CHARTS COMPATIBILITY
Hello, dears,

http://www.raymarine.com/content/?id=9606 says that e.g. AXIOM 9 should be compatible with Standard Mapping. What is it exactly? Can I use Inland ECDIS S57 charts?

You can find maps here:
http://mapy.spspraha.cz/lpm/maps_S57.asp?lang=en

http://www.ris.eu/general/what_is_ris_/e...arts__enc_

Thanks in advance,

Josef


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
09-12-19, 09:55 AM (This post was last modified: 09-12-19 09:56 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] MARINE CHARTS COMPATIBILITY
Welcome to the Raymarine Form Joseph,

Raymarine's MFDs running LightHouse II and LightHouse 3 software are exclusively compatible with the following types of cartography:

- LightHouse Charts downloaded from Raymarine's Charts Store (includes: Blue Latitude, Fugawi Aboard, Solteknik HB, Wavey Line, etc)

- LightHouse NC2 Chart Cards purchased from and authorized Raymarine dealer

- Navionics+ and Navionics Platinum+ Chart Cards

- C-Map Essentials (bundled with Raymarine MFDs) and 4D MAX+

- Standard Mapping e-cards

Q1. AXIOM 9 should be compatible with Standard Mapping. What is it exactly?
A1. Standard Mapping is a brand name ... more specifically Standard Mapping e-cards are designed for use with Raymarine products.

Q2. Can I use Inland ECDIS S57 charts?
A2. Negative.
Visit this user's website Find all posts by this user
Quote this message in a reply
09-13-19, 01:22 PM
Post: #3
Thumbs Up RE: [CA11] MARINE CHARTS COMPATIBILITY
Thank you! Josef
Find all posts by this user
Quote this message in a reply
09-13-19, 01:29 PM
Post: #4
RE: [CA11] MARINE CHARTS COMPATIBILITY
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us