Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] ST60+ Series NEMA 2000 Replacements
09-12-19, 02:35 PM (This post was last modified: 09-12-19 04:08 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] ST60+ Series NEMA 2000 Replacements
I have a dual helm on my Jeanneau SO42DS. The system was upgraded last year wit Axiom 12 and Quantum radar, along with replacing the depth/speed i50 gauge (1) with a NEMA2000 adaptors. I want to upgrade the remaining instruments. The starboard side has a ST60+ WIND (NEMA183) gauge & a ST60+ TRIDATA Autohelm Series gauge. The port side is a slave (I believe) to the starboard side but without the i50 gauge. What are the replacement gauges I need?
Find all posts by this user
Quote this message in a reply
09-13-19, 08:35 AM
Post: #2
RE: [CA11] ST60+ Series NEMA 2000 Replacements
Welcome to the Raymarine Forum tafika2,

Q1. depth/speed i50 gauge (1) with a NEMA2000 adaptors.
A1. Can I assume that the instrument which you have referenced is an i50 Tridata Instrument?

Q2. I want to upgrade the remaining instruments. The starboard side has a ST60+ WIND (NEMA183) gauge & a ST60+ TRIDATA Autohelm Series gauge.
A2. Please note that all ST60/ST60+ instruments except for the Graphic and Multi were only capable of supporting SeaTalk communications (i.e. no support for NMEA 0183 communications). If replacing a ST60+ Wind Instrument, an i60 Wind Instrument would be recommended. Similarly if replacing a ST60+ Tridata, then an i50 Tridata would be recommended. When transducer's have not been interfaced to instruments they will either automatically, or may be configured (via their menus) to function as repeaters.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us