Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] DSM30 to AXIOM 7 RV adaptator cable
09-13-19, 04:44 AM (This post was last modified: 09-13-19 09:40 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] DSM30 to AXIOM 7 RV adaptator cable
Hi,

I'm looking for the reference of the cable adaptator to plug my transducer in my new AXIOM 7 RV.

The transducer was pluged in my DSM30 before I bought the AXIOM.

Thank you.
Find all posts by this user
Quote this message in a reply
09-13-19, 09:46 AM (This post was last modified: 09-13-19 09:47 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] DSM30 to AXIOM 7 RV adaptator cable
Welcome to the Raymarine Forum DaCoolG,

The A80489 Adapter Cable would be used with transducers which had been designed to be directly mated to a CP370/DSM30/DSM300/DSM250 Fishfinder Sounder Module or to a hsb/hsb2/SL Pathfinder Series Fishfinder. If you will be additionally using a RealVision transducer(s), then an A80492 Y-Cable will be required. Please note that if the aforementioned Y-Cable is used, then both a RV transducer(s) and CP370/DSM30/DSM300/DSM250 Fishfinder Sounder Module / hsb/hsb2/SL Pathfinder Series Fishfinder compatible transducer must both be simultaneously connected to the Y-Cable or the Axiom RV MFD's fishfinder features will not function for the connected transducer.
Find all posts by this user
Quote this message in a reply
09-16-19, 03:24 AM
Post: #3
RE: [CA11] DSM30 to AXIOM 7 RV adaptator cable
Thank you very much !!!
Find all posts by this user
Quote this message in a reply
09-16-19, 08:00 AM
Post: #4
RE: [CA11] DSM30 to AXIOM 7 RV adaptator cable
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)