Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] CPT 120 dv transducer
09-23-19, 08:45 PM (This post was last modified: 09-24-19 11:00 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] CPT 120 dv transducer
Hi I have an issue with my es128 mfd were the transducer on broken off. So I purchased cp100 module to connect the transducer to it then to the network. The problem is that I need to splice a new connector on the end of the transducer cable because one of the pins is broken off. I went to a raymarine authorized dealer and they sold me a cable extension. When I cut off the end they were more bundles of wires in the new cable end. The cpt120 cable only has 2 twisted pairs black red and two bare wires. The new end had 4 twisted paires black, red, white and two bare wires. which wires do I connect together to add the new end or did the guy sell me the wrong connector even though the pins at the end are the same. fits the socket.


Attached File(s) Thumbnail(s)
       
Find all posts by this user
Quote this message in a reply
09-24-19, 11:21 AM
Post: #2
RE: [CA11] CPT 120 dv transducer
Welcome to the Raymarine Forum senangsekali,

Please click here to view a FAQ addressing splicing cables of fishinder transducers. A indicated therein, it is recommended that when a transducer cable has been damaged or cut, that the transducer be replaced, permitting an unaltered cable to be interfaced to the fishfinding product.
Visit this user's website Find all posts by this user
Quote this message in a reply
09-24-19, 07:11 PM (This post was last modified: 09-25-19 09:06 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] CPT 120 dv transducer
Do you have the pin and wire color for the cpt120.
Find all posts by this user
Quote this message in a reply
10-01-19, 01:39 PM
Post: #4
RE: [CA11] CPT 120 dv transducer
senangsekali,

See attachment.


Attached File(s) Thumbnail(s)
   
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us