Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Magnum radar with gS series MFD
09-27-19, 02:47 PM (This post was last modified: 09-27-19 03:29 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Magnum radar with gS series MFD
Considering upgrading from a 12 year old HD 4’ open array to a Magnum. The website ways Magnum is compatible with gS series running Lighthouse 2. My gS MFD’s are running Lighthouse 3. Will they be compatible?

Also, what new features of the Magnum will I not get since I’m not using an Axiom MFD?

Thanks!
Tim
Find all posts by this user
Quote this message in a reply
09-27-19, 03:40 PM
Post: #2
RE: [CA11] Magnum radar with gS series MFD
Welcome to the Raymarine Forum Tim,

Q1. The website ways Magnum is compatible with gS series running Lighthouse 2. My gS MFD’s are running Lighthouse 3. Will they be compatible?
A1. Yes.

Q2. What new features of the Magnum will I not get since I’m not using an Axiom MFD?
A2. With the exception of auto MARPA, all of the radar features specified within the LightHouse 3.10 Advanced Operation Instructions for Magnum radars will be supported by gS-Series MFDs running LH3 software which have been interfaced to a Magnum Radar.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)