Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom Dashboard Fuel Display
09-29-19, 08:07 PM (This post was last modified: 10-02-19 12:16 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Axiom Dashboard Fuel Display
Hello Currently running the new version, 3.10.71. I am having a problem on the Dashboard Tanks page where the graphical gauge in the upper right corner will not show correct fuel level. I am assuming that this is due to instancing, as I have read other posts, and see that my tanks are tank 0 and tank 3 that show proper usage. Is there a way to define what instance's data populates that gauge?
Find all posts by this user
Quote this message in a reply
10-02-19, 12:32 PM
Post: #2
RE: [CA11] Axiom Dashboard Fuel Display
Welcome back to the Raymarine Forum Thebobman,

Q. Is there a way to define what instance's data populates that gauge?
A. Yes. Please refer to the Calibrating tanks section of Chapter 5.11: Settiongs of the LightHouse 3.10 Advanced Operation Instructions. While you and change the name of the tank which will be displayed within the graphic, you will need to select that the corresponding data cells will be populated with data from Tank 1 (instance 0) and Tank 4 (instance 3) when configuring the Dashboard.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)