Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Feedback from a/c/e/gs series owners on LH3 performance
10-06-19, 06:46 PM (This post was last modified: 10-07-19 02:53 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Feedback from a/c/e/gs series owners on LH3 performance
Good evening,

I'm curious to hear feedback from any a/c/e/gs series MFD owners who have converted from the LH2 to the LH3 operating system, what are your thoughts on overall performance and in specific applications like Chart and Sonar?

Thank you.
Find all posts by this user
Quote this message in a reply
10-07-19, 02:57 PM (This post was last modified: 10-07-19 02:59 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Feedback from a/c/e/gs series owners on LH3 performance
Welcome back to the Raymarine Forum KW_84,

Please note of the MFDs which you have listed, a-Series, c-Series, and e-Series MFDs cannot run and will not be permitted to install LightHouse 3 software. LightHouse 3 software may only be installed into Axiom / Axiom Pro / Axiom XL MFDs, eS-Series MFDs, and gS-Series MFDs. Installation of LightHouse 3 software within eS/gS-Series MFDs is typically recommended only within within systems which additionally feature Axiom/Axiom Pro/Axiom XL MFDs. Please additionally note that while LightHouse 3 software will continue to evolve for Axiom / Axiom Pro / Axiom XL MFDs, the last version of LightHouse 3 software which may be used within eS/gS-Series MFDs will likely be LightHouse 3 v3.11.x.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us