Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] RV-100 transducer elements arrangement
10-13-19, 04:50 AM (This post was last modified: 10-14-19 12:54 AM by Louise - Raymarine - Moderator.)
Post: #1
[LW11] RV-100 transducer elements arrangement
Could some Raymarine technician explain how the various elements are arranged / positioned in RV-100 from fore to aft? The purpose is to optimize my transom installation, see pic.
Find all posts by this user
Quote this message in a reply
10-23-19, 05:44 AM
Post: #2
RE: [LW11] RV-100 transducer elements arrangement
Dear Markus,

Thank you for your post. We are unable to provide the positioning of the elements inside the transducer as this is confidential information.

I have sent your request to the product manager to see if we can provide the beam angles.

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
10-23-19, 12:28 PM
Post: #3
RE: [LW11] RV-100 transducer elements arrangement
ok, I partly understand...

Anyway, I appreciate any information that could help me to improve the RV-100 performance at planing speeds to avoid loss the conical chirp element reading. It seems really difficult to find right tranducer adjustment in terms of horizontal tilting and vertical height. Never experienced such tricky transducer to install...believe me I have done some trial on this.

Thanks
Find all posts by this user
Quote this message in a reply
10-25-19, 07:29 AM
Post: #4
RE: [LW11] RV-100 transducer elements arrangement
Can you contact myself at support.uk@raymarine.com

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)