Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] SmartPilot X-5
10-20-19, 03:10 PM (This post was last modified: 10-22-19 10:37 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] SmartPilot X-5
Hello.
The autopilot dont recognize the rudder angle indicator and lost the course.
I tested separeted the rudder angle indicator and its work fine.
What can I do..??
Thanks.
Find all posts by this user
Quote this message in a reply
10-22-19, 10:41 AM
Post: #2
RE: [CA11] SmartPilot X-5
Welcome to the Raymarine Forum Replacement marcelowainer,

Should you have tested the rudder reference transducer in the manner specified with FAQ found here and found no fault with the rudder reference transducer, then the autopilot course computer would appear to have suffered a failure, necessitating that it be sent to Raymarine’s Product Repair Center to be bench checked / serviced or replaced.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us