MyBB Internal: One or more warnings occured. Please contact your administrator for assistance.
Raymarine forum - [TG11] Connecting a Fusion RA70 with NMEA2000 port to an Axiom Pro?

Raymarine forum

Full Version: [TG11] Connecting a Fusion RA70 with NMEA2000 port to an Axiom Pro?
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
From what I read in one of your FAQ threads above, it sounds like it's as easy as running an NMEA2000 cable from the Fusion RA70 and using a Seatalk to NMEA2000 adapter and simply plugging it into an open port on the existing 5-port Seatalk connector. Am I reading that correctly?
Hello Grady330,

That's right. Just make sure that the Fusion isn't outputting power to STNG/NMEA2000, since it's important to only have a single point of power and some Fusion stereos (I don't know if the RA70 is amongst them) can/do output what they refer to as NRX Power. Multiple points of power, particularly if one of them is a switchmode supply, can cause reliability issues.

Regards,
Tom
Reference URL's