02-17-16, 08:50 AM
I have just completed a new install with a98 displays and a Fusion UD650 and I am having problems with the Fusion controls on the a98.
When viewing menus for an attached iPod the menus are incomplete. Instead of showing the menu text it shows a number. I have attached a couple of examples of how the menu appears.
Also on occasion when selecting Fusion from the home screen the unit reboots. This seems to be more of a warm boot then a full reboot as the screen goes blank and the light house logo appears but then it will go directly to the fusion screen when finished.
The full system is connected as follows
Dual a98 MFDs connected via Raynet Firmware v15.61
Lenco Autoglide --> NMEA 2000
Mercury VesselView --> NMEA 2000, firmware v5 build 579
Fusion UD650 --> NMEA 2000, firmware build 265
I have done a little leg work on my own trying to resolve the issue. First was to insure all devices are using the latest firmware, no resolution. Second I disconnected everything except a minimal system. Single a98 connected to only the Fusion UD650, all other connections removed. Still the same result.
With the direction of support from Fusion I downgraded the UD650 to a previous version 1198 with no resolution. There does not appear to be an option of a previous version of firmware for the a98 as support for fusion via NMEA 2000 is only available in the recent version.
When viewing menus for an attached iPod the menus are incomplete. Instead of showing the menu text it shows a number. I have attached a couple of examples of how the menu appears.
Also on occasion when selecting Fusion from the home screen the unit reboots. This seems to be more of a warm boot then a full reboot as the screen goes blank and the light house logo appears but then it will go directly to the fusion screen when finished.
The full system is connected as follows
Dual a98 MFDs connected via Raynet Firmware v15.61
Lenco Autoglide --> NMEA 2000
Mercury VesselView --> NMEA 2000, firmware v5 build 579
Fusion UD650 --> NMEA 2000, firmware build 265
I have done a little leg work on my own trying to resolve the issue. First was to insure all devices are using the latest firmware, no resolution. Second I disconnected everything except a minimal system. Single a98 connected to only the Fusion UD650, all other connections removed. Still the same result.
With the direction of support from Fusion I downgraded the UD650 to a previous version 1198 with no resolution. There does not appear to be an option of a previous version of firmware for the a98 as support for fusion via NMEA 2000 is only available in the recent version.