Raymarine forum

Full Version: Temperature Readout ST-60 Speed
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
About mid summer last year, I started to get erroneous temperature readouts from the ST-60 Speed Log. All other functions work fine. There is a temperature presented, usually 2 degrees centigrade, but it varies a bit. Actual water temp in the high teens at least.

Is there a reset, or reboot to try. I'm assuming wiring is ok, as the speed information from impeller is transmitted fine.
Welcome to the Raymarine Forum kpintoronto,

Please click here to view a FAQ addressing this subject.
Reference URL's