01-06-16, 10:43 AM
Sharing NTSC/PAL video among MFDs
Raymarine MFDs are not designed to transmit received NTSC/PAL video via Ethernet to other networked Raymarine MFDs. As such, the camera's video output cable will need to be interfaced to a video amplifier/splitter (FLIR part #4108996 recommended), which in turn will be interfaced to the Camera/Video 1 input BNC plug of each MFD on which thermal video is desired to be viewed.
RAYFAQ#
Raymarine MFDs are not designed to transmit received NTSC/PAL video via Ethernet to other networked Raymarine MFDs. As such, the camera's video output cable will need to be interfaced to a video amplifier/splitter (FLIR part #4108996 recommended), which in turn will be interfaced to the Camera/Video 1 input BNC plug of each MFD on which thermal video is desired to be viewed.
RAYFAQ#