MyBB Internal: One or more warnings occured. Please contact your administrator for assistance.
Raymarine forum - ST2000+ broken gaskets

Raymarine forum

Full Version: ST2000+ broken gaskets
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
I found some broken gasket parts inside our ST2000+.
Is one of them from the pushrods exit end of the unit?
Appears as though the other one might be a bushing from behind the largest gear on the belt/gear arrangement?
Are these parts available?
The unit was failing due to these parts falling underneath the internal compass gimbal, restricting its movement.
Welcome to the Raymarine Forum Maluhia,

Raymarine does not consider the ST2000+ to be an end user repairable item. Accordingly, internal parts and repair instructions are not available. It is recommended that the ST2000+ be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Thanks Chuck.
Removed gasket shrapnel, unit tested o.k. in 5 foot waves and 18-20 kits of wind in AUTOmfor an hour or so. It did experience a power interruption, but immediately turned back on in STANDBY mode. (it was powering off before after a few minutes of use, and not coming back on)
You're welcome.
Reference URL's