Raymarine forum

Full Version: Wind data missing
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Dear Moderador, I had an issue on my wind data not showing properly on ST60+ graphic displays on a mast bracket, nor on the rest of the system, so I swap the wind vane with a friend's boat and my wind vane worked normaly, on my system the mast cable goes trough a Wind Pod (E22108) and then to the A70D gps/plotter, all other data (speed, depth,gps) are working in the system, how could I test the Wind Pod or could I change the Pod to an iTC5 ?
My system: ST60+graphic, ST70, A70D, VHF RAY 49E, Auto Pilot ST6002, i70
There isn't a test in the field to test a Wind POD, although what you have done of bringing your masthead to another boat does point toward the POD. The Wind POD can be sent to the below address to be evaluated by a service technician for repair or it can be replaced by an iTC-5.

Raymarine Service Center
9 Townsend West
Nashua, NH 03063

Include in the box:
Daytime Phone
Return address
Brief description of the issue
Reference URL's