MyBB Internal: One or more warnings occured. Please contact your administrator for assistance.
Raymarine forum - [DG11] Problem Ais 700

Raymarine forum

Full Version: [DG11] Problem Ais 700
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hallo,
Today I had a problem with my new Ais 700.
When connected on the 12v power the light goes in green mode,
after 5-6:minutes the light switch in red..
I cannot understand what can be.

If I disconnect the power, and then connect it again goes in green, 5 minutes and again in red :(
Can you help me ??
Thank you.
Antonio.
H iToniocask

Thank you for your enquiry

Please can you advise if you have connected PRO AIS2 to the AIS700 and set up the AIS700 complete with MMSI number?

If you connect PROAIS2 to the AIS700 and check the diagnostics this might indicate the nature of the fault.

Regards
Derek
Yes, the set up was made with the mmsi number.
The PROAIS2 diagnostic indicate me this error:
AIS : UTC sync invalid
Thank you
Dear Antonio,

There is a new software update for the AIS700 on the Raymarine website see here for software update

This update should correct the alarm.

Regards

Derek
Reference URL's