Raymarine forum

Full Version: [CA11] Connect Raystar 150 to Axiom 9
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
I am wanting to connect a Raystar 150 to my Axiom 9 MFD. I purchased The Seatalk NG starter kit as the manual said but there is no suitable cable to connect the starter kit to the Axiom MFD. AM I missing something? With my old c80 system the remote GPS receiver plugged directly in the the C80.
Welcome to the Raymarine Forum ktcarter,

You were indeed correct in believing that the Axiom MFD and Raystar 150 GPS Sensor were each designed to be interfaced as spurs to a powered and properly terminated SeaTalkng / NMEA 2000 backbone. However, as the NMEA 2000 communications interface of the Axiom/Axiom Pro/Axiom XL MFDs have been terminated with a DeviceNet Micro-C male plug, an A06045 0.4m SeaTalkng to DeviceNet (F) Adapter or A06075 1m SeaTalkng to DeviceNet (F) Adapter will be required to mate the MFD's NMEA 2000 socket to a spur socket (white) within the backbone.
Got her ordered and thanks for your assistance.
You're welcome.
Reference URL's