MyBB Internal: One or more warnings occured. Please contact your administrator for assistance.
Raymarine forum - [DG11] Mounting Camera to top of Quantum Radar

Raymarine forum

Full Version: [DG11] Mounting Camera to top of Quantum Radar
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hi - The promotional video for the Quantum Radar posted to YouTube (see attached photo) shows a camera mounted to the top of the Radar housing. I am interested in this same setup as I need my camera to be as high as possible. I was unable to locate instructions however that shows the recommended way to affix the camera to the radar housing or how to pass the camera cabling through the radar unit. Could you kindly point me in the right direction?
Hi hynespa

Thank you for your enquiry,

The screenshot that you sent is a foreshortened view, please see the below image for the actual mounting . . .

[Image: attachment.php?aid=2675]

The previous part of the video shows how this camera is actually mounted,
[Image: attachment.php?aid=2676]

We do not recommend mounting the camera directly on top of the radome, always use a dedicated mast or mounting tower for the camera.

Regards
Derek
Derek - Thanks for your reply! Do you have a part number or ordering information for that mast that is holding both the camera and the radar?
Hi Hynespa,

Thankyou for your feedback, the A80147 is one option from Raymarine, please also refer to the Scanstrut website shown here for further details

[Image: attachment.php?aid=2689]
Reference URL's