MyBB Internal: One or more warnings occured. Please contact your administrator for assistance.
Raymarine forum - [CA11] Replacing C90W with Axion MFD

Raymarine forum

Full Version: [CA11] Replacing C90W with Axion MFD
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Replacing cockpit and Nav station C90W with Axiom 7 on Swan 40. Cable conduits are full, and cannot pull Raynet ends through. I can use the existing 14/2 power supplies for the new MFDs. Can I use the existing, good condition, HS cable, and splice in the RayNet cable ends ?
Welcome to the Raymarine Forum Limestone45,

Please click here to view a FAQ addressing this subject. The power leads of the Axiom MFD Power/NMEA 2000 Cables may be splice to the currently installed 14-2 power cable which is currently supplying powering the Widescreen MFDs. As indicated within the referenced FAQ, adapter are available to permit the currently installed SeaTalkhs Cable to be re-purposed.
Reference URL's