Raymarine forum

Full Version: [CA11] Raymarine (A97/E125) to new Yanmar 4JH110
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
We have a Raymarine network (Raymarine E125, A97, Radar, AIS, etc) and have purchased and are having installed a 2019 Yanmar 4JH110 Common Rail motor.

Attached photo is at the A97 MFD at the cockpit pedestal. Can you help with which devices we need and how to make the network connections.

Thank you
Welcome to the Raymarine Forum Doug,

Please click here to view a FAQ addressing this subject. As indicated on the Yanmar tab of Raymarine ECI-100's Compatibility web page, the ECI-100 is compatible with Yanmar's 4JH110. Accordingly, it would be recommended that an ECI-100 be interfaced between a spur socket within the marine electronics backbone and the Yanmar engine system. Should the present marine electronics backbone not feature an unused spur socket then Please click here to view a FAQ addressing how an additional spur socket(s) may be added to the backbone.
Reference URL's