Raymarine forum

Full Version: [CA11] Update Axiom 7
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
I bought an Axiom 7 in early 2018 to replace instruments damaged in Irma 2017.

In June 2019 I finished the install and bringing it all on line. I checked the software version on the Axiom 7 and it was 3.9.46 and last updated on 02/17/2017.

This is the latest version of the software and updated in April 2019. I have not updated the software before. When I download the software, put it on a 64GB mSD card, inserted it into the mSD slot in the Axiom 7 (where the chart chip normally goes) no updated software is found.

My questions are;

1. How did 3.9.46 get on the MFD?
2. Is there something obvious I am missing?

Welcome to the Raymarine Forum Sam,

Please click here to view a FAQ addressing this subject. I suspect that you will find that the microSD memory card used to perform the update is either incorrectly formatted or has been incorrectly populated with the software update files.
Reference URL's