Raymarine forum

Full Version: [CA11] Send position to nmea0183 vhf
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
I have a fully working seatalkng network with an axiom 9 mfd. I inserted a seatalk1 / seatalkng convertor near the vhf and used a bare end spur cable to connect the vhf “listen” or RX connection. When I connect the spur to the converter, the diagnostic light goes from indicating ‘healthy’ to “on” indicating low voltage.

What is the correct way to make this interface work?

Welcome to the Raymarine Forum Kevin,

Please click here to view a FAQ addressing this subject.
Reference URL's