Raymarine forum

Full Version: Anchor camera
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Dear Forum members,

I Would like to instal a camera to check if may anchor is totally folded. I have an A98 MDF. Could someone give-me a tip what would be the best an ship solution for this.

Thanks in advance.


Welcome to the Raymarine Forum João,

The a9x MFDs are compatible with cameras having either a NTSC/PAL video interface (ex. CAM100) or Ethernet interface (ex. CAM210, CAM220, and CAM200IP). You may want to consider the CAM220 for your application.
Dear chuck,

i Tried use a camera with a BNc conector, but there is only one conector in MFD for GA 150. how I connect the BNc to MFD? Do I need something else.


The GA150 actually connects to the MFD's TNC socket. The MFD's Power/NMEA 0183/Video Input Cable features a BNC connector to support interfacing camera producing a NTSC/PAL analog video signal.
Reference URL's