+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [TG] E7 series MFD with a B744V transducer (/showthread.php?tid=11070)
Pages: 1 2
RE: E7 series MFD with a B744V transducer - Tom - Raymarine - Moderator - 05-29-20 02:16 AM
Hello Bob,
Sorry for the delay replying, but I'm very pleased to hear it's all working well now. Good news! I don't think I"m likely to be back in Goleta any time soon, but thanks very much for the offer.
On the GA150, as a passive device it won't show up in the diagnostic device list: you still use the internal receiver electronics, but the GA150 improves its signal. The way you can tell that it's connected and working is to see the difference in Home > Setup > System Settings > GPS Setup > View Satellite Status. You should see a marked difference in the signal levels, number of satellites in view, HDOP and fix accuracy with the GA150 compared to without.
Regards,
Tom