+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: [CA] [CA11] E28081 Wind Transducer Service Kit Instructions (/showthread.php?tid=1342)
Pages: 1 2
RE: [CA11] E28081 Wind Transducer Service Kit Instructions - JIMTATUM - 06-04-18 03:52 PM
Ahhh. Understood. Thanks.
Is there a written process available for recalibration along with a drawing of the replacement procedure?
Jim
RE: [CA11] E28081 Wind Transducer Service Kit Instructions - Chuck - Raymarine - Moderator - 06-05-18 09:02 AM
Jim,
The instructions for calibration of the Wind Instrument may be found here. No written instructions are supplied with the A28167 Raymarine Masthead Wind Transducer Service Kit, as replacement steps are obvious for anyone having basic homeowner skills. A phillips head screw holds the vane to the vane shaft and similarly, a phillips head screw holds the cups to the wind speed shaft. Both the vane and cups feature an indexing flat to match the respective flats on the vane shaft and wind speed shaft.