+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [CA] [CA11] A127 Needing Transducer Options (/showthread.php?tid=7045)
Pages: 1 2
RE: [CA11] A127 Needing Transducer Options - [email protected] - 01-08-19 07:49 PM
Thanks Chuck. I reviewed the manual for the new Tri-Data, and didn't see the ability to individually set them, but if I read between the lines so to speak, I think I can see how I would set just the depth to repeater mode, and not the speed.
As always, thanks so much for getting back to me and your patience!
Dave
RE: [CA11] A127 Needing Transducer Options - Chuck - Raymarine - Moderator - 01-09-19 09:32 AM
Dave,
Unfortunately, the manuals for the ST60/ST60+ instruments omitted information concerning how to configure master/slave settings. Please click here to view a FAQ addressing this subject.
RE: [CA11] A127 Needing Transducer Options - [email protected] - 02-07-19 12:48 PM
Hey Chuck, my reseller is indicating problems with getting the B60 transducer. The recommendation is a A80447. I have checked and know that a 20 degree unit will work best. Can you advise if the A80447 will be able to direct connect to an A127 to provide both depth and underwater landscape view? I understand that the A80447 is plastic which is fine, (same as the old transducer that will come out).
If the A80447 is OK, can you include a link to the product so that I can check out physical dimensions?
tks
Dave
RE: [CA11] A127 Needing Transducer Options - Chuck - Raymarine - Moderator - 02-07-19 01:27 PM
Dave,
The 600W fishfinder circuitry to of the ax7/cx7/e7D/ex7/eSx7 MFDs is exclusively designed to function in conjuction with a compatible 600W or 1kW 50kHz/200kHz fishfinder transducer. The A80447 is not such a transducer. The A80447 is a CPT-S transducer which is designed to be interfaced to the transducer of an ax8/eSx8 MFD, Axiom DV MFD, or CP100 DownVision Sounder Module. If seeking to use a CPT-S transducer with an ax7/cx7/e7D/ex7/eSx7 MFD, it would be necessary to interface the CPT-S transducer to an ax8/eSx8 MFD or CP100 DownVision Sounder Module, which in turn would be interfaced to the ax7/cx7/e7D/ex7/eSx7 MFD.
Alternatively, you may want to consider adapting (part #E66066) one of the CP370 compatible B60 transducers to permit the transducer to be mated to your MFD's fishfinder Transducer socket.
RE: [CA11] A127 Needing Transducer Options - [email protected] - 02-07-19 01:34 PM
So there is no plastic, thru-hull transducer with only depth or depth/temperature that can be direct connected to the A127?
tks
Dave
RE: [CA11] A127 Needing Transducer Options - Chuck - Raymarine - Moderator - 02-07-19 02:55 PM
Dave,
Raymarine offers no plastic tilted element transducers.