+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [LW] [LW11] Compatibility with NMEA2000 when SeaTalkNG and SeaTalk products are connected (/showthread.php?tid=10034)
[LW11] Compatibility with NMEA2000 when SeaTalkNG and SeaTalk products are connected - svdlinden - 12-03-19 06:43 AM
In the SeaTalkNG reference manual (81300-1) on page 6, there is this paragraph about limitations:
"If SeaTalkng and SeaTalk(1) products are used together, do NOT connect an NMEA2000 backbone, as this product combination could compromise the integrity of the NMEA2000 system."
I am not sure I understand this correctly. Does that mean that NMEA2000 devices cannot be connected to the SeaTalkNG backbone when, e.g., a SeaTalk to SeaTalkNG converter (E22158) is used?
The manual for the converter doesn't mention anything like that.
RE: [LW11] Compatibility with NMEA2000 when SeaTalkNG and SeaTalk products are connected - Louise - Raymarine - Moderator - 12-05-19 05:16 AM
Dear svdlinden,
The use of ST1 products networked with a STng system is fine as long as networked correctly.
The manual needs updating, this is referring to the earlier days of STng. I will get this attended to.
Many Thanks
Louise