+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [TG] [TG11] Axiom 9 Display issue (/showthread.php?tid=10056)
[TG11] Axiom 9 Display issue - solidnetworks - 12-06-19 01:05 AM
Hi, i turned on my MFD today to update the software and the screen was playing up, i have attached a video of the display.
RE: [TG11] Axiom 9 Display issue - Tom - Raymarine - Moderator - 12-09-19 09:54 PM
Hello Solidnetworks,
Personally I haven't seen or heard of anything like that on an Axiom. I have seen similar things on other displays result from severe noise signals on cabling, so I would suggest seeing if the same thing occurs with the Axiom on a completely independent power supply, disconnected from everything else. If it does, or it's not practical for you to do this test then I would suggest getting your supplying dealer, your local Service dealer (tick Certified Installation to see service dealers) or our own service workshop to check it for you.
Regards,
Tom