+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: General Discussions (/forumdisplay.php?fid=2)
+--- Thread: [CA] [CA11] Axiom and Mercury Vessel View (/showthread.php?tid=10057)
[CA11] Axiom and Mercury Vessel View - Travermd11 - 12-06-19 07:29 AM
I know there are proprietary issues involved but is there any talk of Axiom/Lighthouse software integrating with Mercury Vessel View so engine data from the vessel view module can be displayed on the Axiom engine page via bluetooth?
RE: [CA11] Axiom and Mercury Vessel View - Chuck - Raymarine - Moderator - 12-06-19 01:23 PM
Welcome to the Raymarine Forum Travermd11,
Please click here to view a FAQ addressing this subject. Raymarine system require wired communications path to the engine system to permit the marine electronics to display/utilize engine data. Early VesselView systems required a SmartCraft to NMEA 2000 Gateway (available from Mercury Marine) to communicate with the vessel's marine electronics SeaTalkng / NMEA 2000 backbone. Later VesselView displays feature a NMEA 2000 port, permitting the VesselView display to be interfaced as a spur to the vessel's marine electronics SeaTalkng / NMEA 2000 backbone.