Raymarine forum
[CA] [CA11] B60 and DSM300 use with Axiom Pro 12 S - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: [CA] [CA11] B60 and DSM300 use with Axiom Pro 12 S (/showthread.php?tid=10098)



[CA11] B60 and DSM300 use with Axiom Pro 12 S - RobWilkinson - 12-11-19 10:09 AM

Can a B60 transducer and DSM 300 be used with the Axiom Pro 12 S i just bought or do i have to replace them?

Regards,
Rob


RE: [CA11] B60 and DSM300 use with Axiom Pro 12 S - Chuck - Raymarine - Moderator - 12-11-19 12:17 PM

Rob,

Regarding the DSM300, these sounder modules are not supported for use with Axiom/Axiom Pro/Axiom XL systems. Specifically, these system have not been specifically designed for use with nor officially tested with DSMs. However, anecdotal feedback from customers has indicated no issues thus far in using an operational DSM with Axiom/Axiom Pro/Axiom XL systems. Accordingly, should your DSM300 be operational, then you might want to try it out with the new Axiom system before replacing it with a CP370. Should there be any sign of issue with the DSM300, then the DSM300 and its Power Cable should be replaced with a CP370 and its Power Cable. When interfaced to these sounder modules and a compatible 50kHz/200kHz transducer, then the Axiom/Axiom Pro/Axiom XL MFD will support 50kHz sonar imaging and 200kHz sonar imaging within the MFD's Fishfinder application.