+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [CA] [CA11] T210 to seatalkng integration (/showthread.php?tid=10113)
[CA11] T210 to seatalkng integration - alejandro - 12-13-19 09:47 AM
Hi Guys, I have a full seatalkng installation in my 41 ' sailboat (two plotters, C95 inside and ES series outside, I50, I60, I70, Quantum radar, Autopilot).
I want to add large displays in the mast, and the only solution in the Raymarine family so far looks like being the wireless T210 and T215. Question: How can I connect them to my installation? Is the wireless data sent from my plotter enough? Should I add any interfase?
Regards,
RE: [CA11] T210 to seatalkng integration - Chuck - Raymarine - Moderator - 12-13-19 12:04 PM
Welcome to the Raymarine Forum alejandro,
In fact, E70361 Raymarine's Micro-Talk Wireless Performance Sailing Gateway is designed just for this purpose ... to function as a wireless bridge between TackTick products and a SeaTalkng / NMEA 2000 backbone. This solution would permit instrument data from your currently installed Raymarine products to be displayed on the TackTick wireless displays. The Micro-Talk would simply be interfaced as a spur to the system's backbone.
RE: [CA11] T210 to seatalkng integration - alejandro - 12-23-19 11:09 PM
Thank you, Chuck!
RE: [CA11] T210 to seatalkng integration - Chuck - Raymarine - Moderator - 12-24-19 09:12 AM
You're welcome.