+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] ECI-100 Work with 2006 Crusader Eng? (/showthread.php?tid=10247)
[CA11] ECI-100 Work with 2006 Crusader Eng? - rshhome - 01-06-20 02:20 PM
Looking to interface my silverton crusader engines to show all engine data on one of my displays. I used smartcraft in the past with mercury engines and worked great. Will this ECI-100 work on crusaders going through my NMEA to my axioms? Thanks
RE: [CA11] ECI-100 Work with 2006 Crusader Eng? - Chuck - Raymarine - Moderator - 01-06-20 05:24 PM
Welcome to the Raymarine Forum rshhome,
The ECI-100 has not been designed and tested for use with Crusader engines. I would recommend that Fox Marine be contacted to determine whether one of their engine gateways may be used with your engine(s).