+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [TG] [TG11] Wind direction on i70 display not working (/showthread.php?tid=10260)
[TG11] Wind direction on i70 display not working - roiias - 01-07-20 06:40 PM
The wind direction on the i70 has stopped working.
All seems to work well at the top of mast equipment.
The arrow on the display is not moving. constantly pointing at the 12 o'clock position.
any way to fix this?
RE: [TG11] Wind direction on i70 display not working - Tom - Raymarine - Moderator - 01-09-20 07:33 PM
Hello roiias,
If you look at a digital (as opposed to analogue dial) display of Apparent Wind Angle and Apparent Wind Speed (AWA & AWS), what specific values do you see?
If you go to Menu > Setup > System Settings > Data Sources > Wind, what device is the wind data coming from? (There is no wind transducer connection directly on the back of an i70, it must be getting the wind data from somewhere else.)
The troubleshooting process for wind data is to find where the windvane is physically connected into your system and measure the signal voltages. For wind angle problems, focus on the voltages on the blue and green wires.
Regards,
Tom