+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] Axiom Pro 12 not recognizing StNG autopilot (/showthread.php?tid=10276)
[CA11] Axiom Pro 12 not recognizing StNG autopilot - John2344 - 01-09-20 03:46 AM
After upgrading to Axiom Pro 12, the SPx30 is not accessible any longer from the MFD, while it is listed on the devices list and also the messages are received, the autopilot functions are greyed out. GoTo cursor, GoTo waypoint, follow route no longer possible.
RE: [CA11] Axiom Pro 12 not recognizing StNG autopilot - Chuck - Raymarine - Moderator - 01-09-20 10:55 AM
Welcome to the Raymarine Forum John,
As indicated therein, these actions are possible, but will require that the autopilot's control head be used to command the autopilot into track mode after having commanded the Go To or Follow Route command. Please click here to view a FAQ addressing this subject. As indicated therein, these actions are possible, but will require that the autopilot's control head be used to command the autopilot into track mode after having commanded the Go To or Follow Route command.