+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [TG] Split Transducer Signal Furuno and Axiom (/showthread.php?tid=10305)
Split Transducer Signal Furuno and Axiom - XandeGuedes - 01-13-20 08:08 PM
We have a Furuno FCV-295 with Airmar R109C-LH transducer. Also have an Axiom 12. Is there any possibility to split the transducer signal for both the Furuno and Axiom?
RE: Split Transducer Signal Furuno and Axiom - Tom - Raymarine - Moderator - 01-14-20 10:31 PM
Hello XandeGuedes,
No, don't try to do this. It won't work and you will destroy the sounders by each putting something over 1000Vp-p into the other's receiver when it transmits.
If there were an industry-standard language for sharing sounder data (analogous to NMEA2000 but for high-bandwidth graphical data) then that might allow the sharing of the sounder image, but at this stage there is no such protocol.
Regards,
Tom