+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: [TG] ST6001 to P70R (/showthread.php?tid=10337)
ST6001 to P70R - r207 - 01-19-20 07:33 PM
Just to confirm as there seems to be so much information about changing the heads on the autopilot.
I Currently have a ST6001 and want to change it to the P70rs that i have purchased
Do i only need the D244 SeaTalk Junction Block plugged into the A22164 1m Adapter Cable.
What else is needed for this or is that all
thanks
R
RE: ST6001 to P70R - Tom - Raymarine - Moderator - 01-20-20 10:10 PM
Hello R,
A22164 has been phased out (use A06073 instead, same connectors and length), but other than that you are spot on. That will work fine.
Tom