Raymarine forum
[CA] [CA11] Axiom 16 mounting options - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] Axiom 16 mounting options (/showthread.php?tid=10340)



[CA11] Axiom 16 mounting options - Jimmorock - 01-19-20 09:25 PM

Hello, i never saw a Axiom XL (16 in) in real, i was planning to mount 2 side by side on my dash panel but looking at the website it seem they are not built with trunion mount capability. is that true?


RE: [CA11] Axiom 16 mounting options - Chuck - Raymarine - Moderator - 01-21-20 05:32 PM

Welcome back to the Raymarine Forum Jim,

Raymarine does not offer a trunion mount for the Axiom Pro 16 MFDs. However, thes MFDs are commonly mounted in a manner other than being flush mounted. To support this end, Raymarine offers the A80537 Axiom Pro 16 Bracket / Ball Mount Plate to support ball mounting solutions such as those from RAM Mounts.


RE: [CA11] Axiom 16 mounting options - Jimmorock - 01-23-20 10:22 AM

awesome
thanks a lot


RE: [CA11] Axiom 16 mounting options - Chuck - Raymarine - Moderator - 01-23-20 11:45 AM

You're welcome.