+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: [LW] [LW11] Autohelm ST6000+ Display problems (/showthread.php?tid=10354)
[LW11] Autohelm ST6000+ Display problems - wotdoino - 01-22-20 09:44 AM
The display on my control unit seems to have a connection issue. When switched on the display shows everything (see attached picture) and then every 20-30 seconds or so it shows the normal screen for a second or so. It appears to control the rudder as expected - or at least the rudder moves when I press +1 or -1 but for most of the time the display is unreadable.
The unit is part of the Autohelm 6000 and is connected to the Course Computer with a Seatalk cable that is plugged in securely both ends.
Is there anything I should try to get the display working properly? is there anything inside the control unit itself that could be be looked at to see if there is a poor connection?
RE: [LW11] Autohelm ST6000+ Display problems - Louise - Raymarine - Moderator - 01-30-20 11:36 AM
Dear wotdoino,
Thank you for your post.
We can no longer repair this product or support this product.
What is your autopilot and I can recommend our current replacement.
Many Thanks
Louise