+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Product Selection Assistance (/forumdisplay.php?fid=124)
+--- Thread: [CA] [CA11] Axiom installation (/showthread.php?tid=10387)
[CA11] Axiom installation - captlad - 01-26-20 12:03 PM
I'm going to retire my old C80 and install a new Axiom 9. My mind is a little foggy about what all I need to buy for this. It looks like besides the unit itself, I will need a new through-hull transducer for downscan and sidescan, a sonar box and a new GPS antenna since my unit location will be under a hardtop and the old antenna is unreliable. Do I have this about right. I'm on the Raymarine site gathering my information on what to order and how much it will cost. I'm also considering a certified Raymarine installer, although this is going to add considerable cost to this project. Any help is appreciated.
RE: [CA11] Axiom installation - Chuck - Raymarine - Moderator - 01-28-20 10:04 AM
Welcome to the Raymarine Forum,
Please click here to view a FAQ addressing replacement of an C-Series Classic MFD with an Axiom MFD.
Q1. It looks like besides the unit itself, I will need a new through-hull transducer for downscan and sidescan, a sonar box and a new GPS antenna since my unit location will be under a hardtop and the old antenna is unreliable. Do I have this about right.
A1. Indeed you appear to be on the correct path. A Raystar 150 GPS Sensor would be recommended for installation atop the hard top. To ensure that I can advise correctly, please respond with the following information:
- has a DSM250, DSM30, or DSM300 been installed onboard? If so, which one of these DSMs is installed onboard? Is the DSM operational?
- what is the maximum depth of water to be fished?
- what type of propulsion does the boat feature (inboard, outboard, I/O)?
- what is the deadrise of the hull?