+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: [CA] [CA11] SPx10 upgrade (/showthread.php?tid=10396)
[CA11] SPx10 upgrade - RobW - 01-27-20 11:48 AM
Greetings,
I'm looking to upgrade my AP on my boat from an SPx10 to an Evolution, and had a couple questions.
Current equipment:
Raymarine -
Axiom XL 16
SP70
SPx10
Quantum 2
Furuno -
TZTL12F
DFF3D
SC33
Nobeltec -
Timezero Pro w PBG using DFF3D
Question - In the Evolution autopilot it calls for using an EV1. Does this unit do more than just the 9 axis sensing? Reason I ask is the Furuno SC33 I have installed does all of this already, just wondering if I can use that existing data and skip the EV1, or is the EV1 also the course computer?
Thanks in advance,
Rob
RE: [CA11] SPx10 upgrade - Chuck - Raymarine - Moderator - 01-28-20 11:28 AM
Welcome to the Raymarine Forum Rob,
Question - In the Evolution autopilot it calls for using an EV1. Does this unit do more than just the 9 axis sensing?
A1. Yes. In addition to 9-axis sensing, the EV-1/EV-2 CCUs are responsible for the course computation & correction aspects of a traditional autopilot. In legacy raymarine modular autopilot designs, course computation and actuator control were both performed within a single component known as the course computer (ex. Type 100/300, Type 150/400, S1/S2/S3, S1G/S2G/S3G, X5, X10, X30, etc.). Within Evolution autopilots, the actuator control has been broken out into a separate component referred to as the ACU.
An EV-1/EV-2 CCU must be included within every Evolution autopilot system.
RE: [CA11] SPx10 upgrade - RobW - 01-28-20 11:40 AM
Thanks Chuck, much appreciated, I'll order the whole package!
Rob
RE: [CA11] SPx10 upgrade - Chuck - Raymarine - Moderator - 01-28-20 11:47 AM
You're welcome.