[LW] [LW11] Smartcontroler - Printable Version +- Raymarine forum (http://forum.raymarine.com) +-- Forum: Raymarine Forums (/forumdisplay.php?fid=1) +--- Forum: Autopilots (/forumdisplay.php?fid=23) +--- Thread: [LW] [LW11] Smartcontroler (/showthread.php?tid=10458) |
[LW11] Smartcontroler - SOL68 - 02-04-20 03:06 PM Hallo , I have connected my smartcontroler autopilot remote but I can change the depth from ft to meters , any ideas ? Thank you. RE: [LW11] Smartcontroler - Louise - Raymarine - Moderator - 02-07-20 04:40 AM Dear SOL68, Where is your depth data coming from? Have you got a ST1 to STng convertor in the network? The Smart Controller will repeat the unit that comes from the master depth data source. Many Thanks Louise RE: [LW11] Smartcontroler - SOL68 - 02-08-20 07:16 AM yes I have a nmea converter. But in my st 6002 autopilot controller I can see the depth in meters. RE: [LW11] Smartcontroler - Louise - Raymarine - Moderator - 02-10-20 12:02 PM Dear SOL68, Thank you for your post. What is your depth data source? Please send in a network diagram for us to look over. Many Thanks Louise RE: [LW11] Smartcontroler - SOL68 - 02-10-20 02:42 PM Found it, thank you. I changed the depth settings from the Ploter to ft and then back to meters and it worked. RE: [LW11] Smartcontroler - Louise - Raymarine - Moderator - 02-14-20 05:44 AM Glad you have resolved it. Many Thanks Louise |