+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [LW] [LW11] Multiple temperature source visualization (/showthread.php?tid=10519)
[LW11] Multiple temperature source visualization - Red_Marlin - 02-12-20 06:32 AM
Hi,
I have several temperature sensors at different places (engine room, salon, outside, etc.) connected to the N2K network. Is there any way to visualize the different sources within my Axiom 12? I only this within the ‘data screen’ the opportunity to add one environmental temperature. The only way that I found was to my temperature measurements as ‘battery temperature’. I can add for each battery the specific temperature. But is this the right approach?
Best regards from Germany
Juergen
RE: [LW11] Multiple temperature source visualization - Tom - Raymarine - Moderator - 02-25-20 12:29 AM
Hello Juergen,
By default Axiom displays can show air or (sea) water temperatures from the Environment section in the Dashboard app, but you may find this page of interest in showing a wider range of data in a more flexible way.
Regards,
Tom