+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [LW] [LW11] How to make a WP with bearing and range. (/showthread.php?tid=10524)
[LW11] How to make a WP with bearing and range. - AlesPC - 02-13-20 03:41 AM
Hi, I'm running Lighthouse 3.11 on a Axiom MDF and i wonder to make a waypoint introducing the bearing and distance. I didn't find how, another's brands say to that option project waypoint.
RE: [TG11] How to make a WP with bearing and range. - Tom - Raymarine - Moderator - 02-25-20 12:42 AM
Hello AlesPC,
At this stage our displays don't allow entering a waypoint by range and bearing, only by lat/lon, at the current vessel position or at the cursor position. You can quickly find a particular range and bearing on the chart with the 'Cursor info boxes' option (on the Advanced tab in the chart setup menu) and then place a waypoint at the cursor.
Regards,
Tom