+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [CA] [CA11] Is it possible to link axiom 9 ff with dv220 and b175 (/showthread.php?tid=10531)
[CA11] Is it possible to link axiom 9 ff with dv220 and b175 - JammanJ - 02-14-20 04:56 PM
Hi, Hames here. Thanks for your advice. I have to throughhull dv220 transducers installed on my boat; because of limited positioning on bottom of boat a little to much disturbance doesn't allow for good bottom readings at speed.
Therefor i was thinking of installing a b175m transducer with 470 transducer module to improve preformance and depth range.
Was wondering with this setup if i could have both the 220 for side an down imaging run the same time as the b175?
RE: [CA11] Is it possible to link axiom 9 ff with dv220 and b175 - Chuck - Raymarine - Moderator - 02-18-20 10:16 AM
Welcome to the Raymarine Forum JammanJ,
Q. Was wondering with this setup if i could have both the 220 for side an down imaging run the same time as the b175?
A. Yes. As DownVision and SideVision transducer elements chirp across a 60kHz range centered on 350kHz and the B175M chirps across a 60kHz range centered on 100kHz, they should be able to operate without interfering with one another.