Raymarine forum
[CA] [CA11] Hooking up my 200 Verado I4 to a Axiom 9RV - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] Hooking up my 200 Verado I4 to a Axiom 9RV (/showthread.php?tid=10577)



[CA11] Hooking up my 200 Verado I4 to a Axiom 9RV - Motorboater222 - 02-20-20 11:49 AM

Can anyone tell me what parts I'll need to hook my 2011 Mercury Verado 200 I4 to my new Axiom 9 RV? I currently have Smartcraft gauges at the helm. Thanks in advance!


RE: [CA11] Hooking up my 200 Verado I4 to a Axiom 9RV - Chuck - Raymarine - Moderator - 02-20-20 02:25 PM

Welcome to the Raymarine Forum Motorboater222,

Please click here to view a FAQ addressing this subject. As suggested within the referenced FAQ, a SmartCraft to NMEA 2000 Engine Gateway will be installed between SmartCraft backbone and the powered and properly terminated SeaTalkng / NMEA 2000 marine electronics backbone to which the MFD will be interfaced as a spur.


RE: [CA11] Hooking up my 200 Verado I4 to a Axiom 9RV - Motorboater222 - 02-20-20 04:37 PM

Thanks!!!