+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Product Selection Assistance (/forumdisplay.php?fid=124)
+--- Thread: [TG] Transducer properties (/showthread.php?tid=10659)
Transducer properties - Dwwmills - 03-02-20 03:09 AM
I'm currently looking at purchasing an Axiom 9 or an Element Hv 9.
If I am correct the Axiom comes with a RV 100 transducer and the Element has a Hv 100 transducer.
The Rv 100 transducer has a motion stabiliser to help compensate for the motion of the boat.
Does the HV 100 transducer have stabilisation?
Thanks for your help
Dean
RE: Transducer properties - Tom - Raymarine - Moderator - 03-02-20 10:04 PM
Hello Dean,
You are correct that Axiom works with RV transducers and Element with HV, and that RV transducers have a sensor ('AHRS') that allows the display to stabilise the 3D image for vessel roll and also orient the image correctly in 'GPS Track' display mode. HV transducers do not have that sensor inside them and therefore the Element displays cannot do either roll stabilisation or GPS Track display mode for the 3D image. Element displays cannot use RV transducers. If those features are important to you then you need to get Axiom rather than Element - this is one of the ways that we were able to offer the Element at a lower price than Axiom.
Regards,
Tom