[CA] [CA11] Older Transducer Indentification - Printable Version +- Raymarine forum (http://forum.raymarine.com) +-- Forum: Raymarine Forums (/forumdisplay.php?fid=1) +--- Forum: Fishfinders (/forumdisplay.php?fid=25) +--- Thread: [CA] [CA11] Older Transducer Indentification (/showthread.php?tid=10707) |
[CA11] Older Transducer Indentification - Paul Gavaza - 03-07-20 09:47 AM I am looking to identify pin point functions for a transducer plug. It is a depth speed and temp from a removed Raytheon L750 fishfinder with 5 pin points. I have not been able to find a wiring diagram for it. Any help would be appreciated. RE: [CA11] Older Transducer Indentification - Chuck - Raymarine - Moderator - 03-09-20 01:39 PM Welcome to the Raymarine Forum Paul, Please note that L750 transducers were produced by Airmar, Inc. for Raymarine. During manufacturing, a tag was affixed to the plug end of the transducer's cable. In order that we may positively identify the transducer, please attach a photo of the transducer's identification tag which clearly shows all information printed on the tag. |